A PHP Error was encountered

Severity: Notice

Message: Only variable references should be returned by reference

Filename: core/Common.php

Line Number: 257

A PHP Error was encountered

Severity: Warning

Message: Cannot modify header information - headers already sent by (output started at /home/speipl/public_html/system/core/Exceptions.php:185)

Filename: libraries/Session.php

Line Number: 688

System Product Enterprises (India) Pvt. Ltd.
Call us at: +91 22 43488488
Products Category

    A PHP Error was encountered

    Severity: Warning

    Message: mysql_fetch_array() expects parameter 1 to be resource, boolean given

    Filename: views/left.php

    Line Number: 36

Request Catalog
Fillup short form for request catalog

Home --> Morley-IAS
isd i&c
  • General
  • Feature
  • Specification
Model MI-ISE analogue addressable ionisation sensors use state-of-the-art sensing chambers coupled with high standards of reliability to provide early warning of developing fires. These sensors are designed for open area protection and must only be connected to control panels that use a compatible proprietary analogue addressable communication protocol for monitoring and control. Two LEDs on each sensor light to provide a local 3600 visible sensor indication. The LEDs can be latched on by code command from the control panel for an alarm indication. The LEDs can also be unlatched to the normal condition by code command. Remote LED indicator capability is available as an optional accessory wired to the standard base terminals.
Operating Voltage Range 15 to 32 VDC Max. Standby Current 200 μA @ 24 VDC (no communication) Max. Avg. Standby Current 300 μA (one communication every 5 sec. with LED blink enabled) Max. Alarm Current (LED on) 6.5 mA @ 24 VDC Operating Humidity Range: 10% to 93% Relative Humidity, non-condensing Operating Temperature Range: -10°C to 60°C NOTE: Do not install in locations where normal ambient temperature range extends beyond 0°C to 50°C Height: 43 mm installed in B501 Base Diameter: 102 mm installed in B501 Base Weight: 102 g This detector has been independently tested and certified to EN54 part 7.