Model MI-HTSE intelligent fixed temperature (Class BS) sensors use a state-of-the-art single thermistor sensing circuit to provide early warning
of developing fires. These sensors are designed for open area protection and must only be connected to control panels that use a compatible
proprietary analogue addressable communication protocol for monitoring and control.
Two LEDs on each sensor light to provide a local 360° visible sensor indication. The LEDs can be latched on by code command from the control
panel for an alarm indication. The LEDs can also be unlatched to the normal condition by code command. Remote LED indicator capability is
available as an optional accessory wired to the standard base terminals.
-
Operating Voltage Range: 15 to 32 VDC
Max. Standby Current: 200μA @ 24 VDC (no communication)
Max. Avg. Standby Current: 300μA (one communication every 5 sec. with LED blink enabled)
Max. Alarm Current (LED on): 7 mA @ 24 VDC
Operating Humidity Range: 10% to 93% Relative Humidity, non condensing
Temperature Range: -30°C to 80°C
Nominal Activation Temperature: 78°C
Height : 51 mm installed in B501 Base
Diameter: 102 mm installed in B501 Base
Weight : 78 g
This detector has been independently tested and certified to prEN54 Part 5 Class BS.