A PHP Error was encountered

Severity: Notice

Message: Only variable references should be returned by reference

Filename: core/Common.php

Line Number: 257

A PHP Error was encountered

Severity: Warning

Message: Cannot modify header information - headers already sent by (output started at /home/speipl/public_html/system/core/Exceptions.php:185)

Filename: libraries/Session.php

Line Number: 688

System Product Enterprises (India) Pvt. Ltd.
Call us at: +91 22 43488488
Products Category

    A PHP Error was encountered

    Severity: Warning

    Message: mysql_fetch_array() expects parameter 1 to be resource, boolean given

    Filename: views/left.php

    Line Number: 36

Request Catalog
Fillup short form for request catalog


Home --> Morley-IAS
CCTV_ 20_20 CTIN
  • General
  • Feature
  • Specification
The Spextrex SharpEye CCTV Flame detector is a selfcontained, triple spectrum optical flame detector that incorporates a video colour camera. The detector’s IR sensors and spectral band pass filters have been selected to ensure the greatest degree of spectral matching to the radiant energy emissions of fire, and the lowest degree of matching to non-fire stimuli. The colour video camera enables the user to investigate the monitored area, to identify the fire’s source and location, and help select the best response to thesituation (activation of fire suppression means). Configuration can be made to issue a live colour video picture signal at all times, on request or only when a fire is detected. Therefore, the detector is also useful for standard CCTV purposes. The patented triple IR circuit design scans for oscillating IR radiation (1 to 10 Hz) in the spectral bands ranging from 4.0 to 5.0 microns. This highly advanced detector uses a programmed algorithm, which checks the ratio and correlation of data received by the three sensors. Only detection of radiation emissions matching the spectral fingerprint of fire will produce an alarm, making the CCTV Flame detector highly immume to false alarms.
• Triple-spectrum design • Highly immune to false alarms • Live colour video image • Sensitivity selection • User-programmable configuration • Automatic manual built-in-test • UL, CENELEC/ATEX approved options • Standard video output • Standard 4-wire connection • M.T.B.F. minimum 43,000 hours • RS-485 MOD BUS compatible
mechanical Dimensions: 120 x 132 x 132 mm Weight: Aluminium: 3.7 Kg Base 1.7 Kg Spectral response: Three IR band channels & CCTV image. Detection range: 1 sq. ft. gasoline fire @ 200 ft.* 1 sq. ft. n-heptane fire @ 200 ft.* 1 sq.ft. diesel oil fire @ 150 ft.* 1 sq. ft. 95% alcohol fire @ 150 ft.* 4 sq. ft. JP4 fire @ 150 ft.* * Highest sensitivity setting. Response time: Typical 5 seconds. Time delay: Up to 30 seconds. Sensitivity range: Four sensitivity ranges set by dip-switch for gasoline pan fire 1x1 ft.2. Setting Detection range 1 50 ft. 2 100 ft. 3 150 ft. 4 200 ft. Field of view: Automatic flame detection: 90°H/90°V Video image: CTIN (NTSC): 70° Horiz., 50° Vert. Built-in-test: Manual & automatic BIT. Operating temperature range: normal 14°F to 113°F without video image: - 40°F to 160°F Relative humidity: up to 95% for the operational temperature range. electrical Operating voltage: 18-32 Vdc Power consumption: Max. 150mA in stand-by Max. 200mA in alarm Electrical connection: Standard two ¾” 14 NPT cable entries. Optional two M25x1.5 cable entries. Electrical input protection: Complete electrical interface protection against reversed polarity voltage, surges, and spikes according to MIL-STD-1275. Electromagnetic compatibility: The detector is designed and approved according to the following EMC requirements: Electrostatic discharge IEC801-2:1984 Conducted emission EN55022 Class A Radiated emission EN55022 Class A Radiated immunity IEC801-3:1984 EFT/B IEC801-4:1988 Outputs: Dry contact relays: Alarm: 2 Amps @ 30 Vdc 0.5 Amps @ 250 Vac Accessory: 5 Amps @ 30 Vdc & 250 Vac Fault: 5 Amps @ 30 Vdc & 250 Vac
//