The CM-EZ-II is a 2-way blind-mount in-ceiling speaker. The CM-EZ-II speaker design incorporates an 8" polypropylene driver with rubber surround and a 7.3-liter steel dome for extended frequency response (54Hz – 22kHz, - 10dB). ATEÏS integrated CM-EZ-II design includes unique and patented blind mount Snap-Cam™ installation technology and a 21-gauge steel tile bridge ensuring rapid and secure installation in any sheetrock or drop-tile ceiling. For easy ordering, stocking and installa- tion, the CM-EZ-II comes with a 6-position tap switch for 25, 70.7 and 100V applications with voice coil/8 Ohm bypass

-

System Type 8” Coax, open-ceiling, sealed (20 Watt transformer for 25/70.7/100 Volt or 8 ohm direct)

Impedance (nominal) 1 8 ohm

Sensitivity dB @ 2.83V/1M 93.0dB

Sensitivity dB @ 1W/1M 2 93.0dB

Distance Factor N/A

Frequency Response (- 3 dB) 3 76 Hz - 22 kHz

Frequency Response (-10 dB) 3 54 Hz - 22 kHz

Max. Program Power 4 80w

Max. Continuous Power RMS 5 40w

Max. UL program power 40w

Max. Power SPL @ 1 M 6 109.0dB

Max. SPL @ x% distortion 7 N/A

Coverage Angle (-6 dB @ 2 kHz) 100°

Coverage Angle (-6 dB @ 10 kHz) 65°

Directivity Factor (Q) 6.09 7.33

Directivity Index (DI) dB 6.2dB 8.7dB

Tap Selector 6-Position rotary switch with 8 ohm direct

Transformer Taps

70.7 V Output 100 V Output 25 V Output

64 W 111.5 dB 64 W 111.5 dB 4 W 99.5 dB

32 W 108.5 dB 32 W 108.5 dB 2 W 96.5 dB

16 W 105.5 dB 16 W 105.5 dB 1 W 93.5 dB

8 W 102.5 dB 8 W 102.5 dB 5 W 90.5 dB

4 W 99.5 dB

Transducer - Low Frequency Driver 203mm (8in) Polypropylene cone, butyl rubber su rround

Transducer - High Frequency Driver 25mm (1in) Polypropylene dome tweeter

Low Frequency Voice Coil 25.4mm 1.00in

Crossover Frequency 5.6kHz

Network Type: Low Pass 6dB per octave, 1st order

Network Type: High Pass 6dB per octave, 1st order

Enclosure Material Drawn steel backcan withABS baffle

Motor-board N/A

Grille Iridite-plated steel with powder-coat finish

Inputs 18-Gauge hard wired leads

Colors Black or white

Backcan Diameter 9.13 in / 231.8 mm

Backcan Height 7.50 in / 190.5 mm

Visible Diameter 10.75 in / 273.1 mm

Visible Height 0.20 in / 5.1 mm

Mounting Hole Diameter 9.75 in / 247.7 mm

Min / Max Ceiling Thickness 0.50 in / 12.7 mm – 0.75 in / 19.1 mm

Weight 7.0 lb / 3.2 kg

Shipping Weight 7.9 lb / 3.6 kg

Accessories

Included Tile bridge, UL listed flex conduit clamp, paint shield

Optional

Pre-Construction Bracket (AC-CM-EZ-PCB)

Packaging 1 per box