The DIVA8M module unit houses: audio digital signal processing (DSP), a matrix, a digital message player, a fully monitored
fireman microphone, amplifiers monitoring with switchover to backup amplifier and loudspeaker lines monitoring. It can
process and route one PSSxxDT security microphone console or up to eight cascaded PSM paging microphones and two
0 dB audio plus one Mic/Line inputs into 2 different channels (Music + Voice). Each input is fitted with volume controls and
equalizers. All audio inputs feature contact and VOX activation (ideal when using the cordless microphone, for example).
Up to 45 minutes of digital messages can be downloaded and recorded as WAV files directly from a computer into DIVA8M.
Two messages can be played simultaneously in different zones. One of the messages can be used as a chime for the PSS
microphone. Nine monitored evacuation inputs making it possible to obtain the pre-programmed routings.
Each DIVA module has eight output zones with a+b wiring. Each zone can be routed manually or automatically to one of
the system’s audio channels (Music and Voice). The number of zones can be extended up to 128 zones with DIVA8MS slave
module. The two Music signals can be switched ON/OFF in each zone separately. In case of Evacuation, the Music channel
can be used as a second alarm channel.
A DIVA system requires only one 2 channel amplifier (one for Music, one for Voice). The Music amplifier will act as a backup
amplifier in case of the Voice amplifier failure. Each channel can handel up to 500 W of audio power (100 V).
0 dB Inputs / Outputs Microphones input impedance: 10 kOhms (balanced, CAT5 terminal)
Input sensitivity: 0 dB
Music input impedance: 10 kOhms (RCA terminal)
Input sensitivity: 0 dB
Audio output impedance: 50 Ohms (balanced, screw terminal)
Output levels: 0 dB
Max input/output level: +14 dBu
Audio bandwidth: 10 Hz to 22 kHz
Sampling: 48 kHz 24 bits
Distortion: 0.02% to 1 kHz
Output noise: <-84 dBu Lin, <-88 dBu A-weighted
Output dynamic: >98 dBu Lin, >102 dBu A-weighted
100 V Inputs/Outputs
Max power: 500 W per DIVA unit.
Amplifier gain measurement: 18 kHz
Line impedance measurement: 100 V 18 kHz
Ground fault measurement under: 12 VDC 0 to 10 MOhms
Bandwidth: 20 Hz to 8 kHz
Sampling: 16 kHz 16 bits
total length : 45 mins
Alarm/Contact Inputs Outputs
9 alarm inputs
8 PA contact inputs
2 contact input : power fault or battery backup fault
8 contact outputs
2 contact output (on/off control): “fault synthesis” +“evacuation underway“
Serial connections per DIVA module
1 RS485 connection to PSSxx DT or PSM
1 RS485 connection to next DIVA module
1 RS232 for third party control (MOD BUS)
Ethernet port for PC communications
DIVA Module Size and enclosure
Metal enclosure: 2U 19” grey RAL 7016
Width x Depth x Height : 430 x 230 x 88 mm