A PHP Error was encountered

Severity: Notice

Message: Only variable references should be returned by reference

Filename: core/Common.php

Line Number: 257

A PHP Error was encountered

Severity: Warning

Message: Cannot modify header information - headers already sent by (output started at /home/speipl/public_html/system/core/Exceptions.php:185)

Filename: libraries/Session.php

Line Number: 688

System Product Enterprises (India) Pvt. Ltd.
Call us at: +91 22 43488488
Products Category

    A PHP Error was encountered

    Severity: Warning

    Message: mysql_fetch_array() expects parameter 1 to be resource, boolean given

    Filename: views/left.php

    Line Number: 36

Request Catalog
Fillup short form for request catalog


Home --> Fire Alarm Systems
2351TEM PhotoThermal Detector
  • General
  • Feature
  • Specification
The 2351TEM photoelectric smoke/thermal detector forms part of the Series 300 range of conventional detectors. This range of detectors has been produced using the latest in manufacturing and design techniques, pushing out the boundaries of existing conventional detector technology. With it’s multitude of innovative features, the Series 300 is a detector which ‘acts conventionally, thinks intelligently’. The 2351TEM photoelectric smoke/thermal detector incorporates an optical chamber and a thermal element, which in turn are continually monitored by an on board processor by using algorithms developed specifically for the unit. An alarm signal is only enabled in the detector once the processor is satisfied that an incipient fire has been detected. By using a combination of inputs, the incidence of nuisance alarms is reduced while at the same time, the response time to an actual fire is also improved. The 2351TEM and other detectors in the Series 300 range are backward compatible with the Series 100 detector bases, thus providing the capability to upgrade, extend and maintain existing Series 100 installations. The 2351TEM detector incorporates a bi-colour LED indicator. The integral LED changes colour according to the detector’s status - Green = Normal, Red = Alarm. This benefits the user by providing clear, instant visual indication of the detector’s condition. The Green LED can be programmed for blink/no blink operation.
  • Low profile design
  • Low current draw
  • Backward compatible with Series 100detector range of bases
  • Wide operating voltage 8 to 30V
  • Bi-colour LED detector status indicator
  • Automatic drift compensation
  • Programmable sensitivity
  • Addressable feature
  • Advanced maintenance Features via remote
  • hand-held test unit
  • Range of detector bases available
  • Tested and approved to EN54 part 7 (2000);EN54 part 5 (2000) Class A1R; CEA4021
  • Extended warranty
Specifications Electrical Operating Voltage Range 8 to 30 VDC (Nominal 12/24VDC) Maximum Standby Current 240μA Maximum Permissible Alarm Current (LED On) 50mA at 24Vdc (Limited by Panel) Environmental Operating Temperature Range (see note 1) -20°C to +60°C -30°C to +70°C for short duration Humidity 5 to 95% Relative Humidity (non-condensing) Mechanical Height 43mm Diameter 102mm Weight 75g Max Wire Gauge for Terminals 1.5mm² Colour Pantone, warm grey 1C Material Bayblend FR110 Product Range Bases (see note 2) B401 Standard base B401SD Standard base with schotty diode B401R Resistor base with 470 ohm resistor B401RSD Standard base with 470 ohm resistor and schotty diode B401RM Standard recess base with 470 ohm resistor B401DG Deep base B401DGR Deep base with 470 ohm resistor B401DGSD Deep base with schotty diode B412NLM2 12V non-latching relay base B412RLM2 12V latching relay base B424RLM2 24V latching relay base Accessories S300RPTU Remote Programming and Test Unit S300RTU Remote Test Unit S300SAT Remote Programming Interface Unit S300ZDU Zonal Display Unit Other Detectors 2351E, 4351E, 5351E
//