The 2351TEM photoelectric smoke/thermal detector forms part of the Series 300 range of conventional detectors.
This range of detectors has been produced using the latest in manufacturing and design techniques, pushing out
the boundaries of existing conventional detector technology. With it’s multitude of innovative features, the Series
300 is a detector which ‘acts conventionally, thinks intelligently’.
The 2351TEM photoelectric smoke/thermal detector incorporates an optical chamber and a thermal element,
which in turn are continually monitored by an on board processor by using algorithms developed specifically for the
unit. An alarm signal is only enabled in the detector once the processor is satisfied that an incipient fire has been
detected. By using a combination of inputs, the incidence of nuisance alarms is reduced while at the same time,
the response time to an actual fire is also improved.
The 2351TEM and other detectors in the Series 300 range are backward compatible with the Series 100 detector
bases, thus providing the capability to upgrade, extend and maintain existing Series 100 installations.
The 2351TEM detector incorporates a bi-colour LED indicator. The integral LED changes colour according to the
detector’s status - Green = Normal, Red = Alarm. This benefits the user by providing clear, instant visual indication
of the detector’s condition. The Green LED can be programmed for blink/no blink operation.
- Low profile design
- Low current draw
- Backward compatible with Series 100detector range of bases
- Wide operating voltage 8 to 30V
- Bi-colour LED detector status indicator
- Automatic drift compensation
- Programmable sensitivity
- Addressable feature
- Advanced maintenance Features via remote
- hand-held test unit
- Range of detector bases available
- Tested and approved to EN54 part 7 (2000);EN54 part 5 (2000) Class A1R; CEA4021
- Extended warranty
Specifications
Electrical
Operating Voltage Range 8 to 30 VDC (Nominal 12/24VDC)
Maximum Standby Current 240μA
Maximum Permissible Alarm Current (LED On) 50mA at 24Vdc (Limited by Panel)
Environmental
Operating Temperature Range (see note 1) -20°C to +60°C
-30°C to +70°C for short duration
Humidity 5 to 95% Relative Humidity (non-condensing)
Mechanical
Height 43mm
Diameter 102mm
Weight 75g
Max Wire Gauge for Terminals 1.5mm²
Colour Pantone, warm grey 1C
Material Bayblend FR110
Product Range
Bases (see note 2) B401 Standard base
B401SD Standard base with schotty diode
B401R Resistor base with 470 ohm resistor
B401RSD Standard base with 470 ohm resistor and schotty diode
B401RM Standard recess base with 470 ohm resistor
B401DG Deep base
B401DGR Deep base with 470 ohm resistor
B401DGSD Deep base with schotty diode
B412NLM2 12V non-latching relay base
B412RLM2 12V latching relay base
B424RLM2 24V latching relay base
Accessories S300RPTU Remote Programming and Test Unit
S300RTU Remote Test Unit
S300SAT Remote Programming Interface Unit
S300ZDU Zonal Display Unit
Other Detectors 2351E, 4351E, 5351E