The ECO1005T thermal detector belongs to System
Sensor’s ECO1000 range of detectors. ECO1000 is
a range of conventional detectors, which have been
produced using the latest in manufacturing technology
and supplied with an array of advanced features, making
them ‘better by design’.
The ECO1005T thermal detector uses a state of the art
thermal element combined with an application specific
integrated circuit (ASIC) to provide quick and accurate
detection of fires. The detector incorporates a static
element and is suitable where ambient conditions
normally exhibit rapid changes in temperature
e.g.kitchens.
A laser-based hand held Remote Test Unit can be used
in conjunction with the range of ECO1000 detectors
for alarm test purposes. The unit transmits a coded
message, preventing spurious alarms being generated
by other laser-based devices. With a range of several
metres, the hand held test unit provides an effortless
way of remotely alarm testing the range of ECO1000
detectors and removes the need for any direct physical
access to the detector by the user.
• Low profile design
• Low current draw
• 580C operating temperature
• Operates at 12 and 24VDC
• Remote alarm test feature
• Easy Maintenance
• Range of detector bases available
• Remote LED Option
• Approved to EN54 –5:2000 Class A2S
• Extended warranty
Electrical Specifications
Operating Voltage Range 8 to 30VDC (Nominal 12/24VDC)
Maximum Standby Current @250C 70μA @ 24VDC
Maximum Permissible Alarm Current 80mA (current limited by control panel)
Environmental Specifications
Application Temperature Range (see note 1) -300C to 700C
Humidity 5% to 95% Relative Humidity (non-condensing)
Mechanical Information
Height 40.5mm (plus 9.5mm for standard base, 21mm for deep base)
Diameter 102mm
Weight 70g (plus 45g for standard base)
Wire Gauge for Terminals 0.4mm2 to 2.0mm2
Colour Approximates to RAL9016
Material ABS