The ECO1005 thermal detector belongs to System
Sensor’s ECO1000 range of detectors. ECO1000 is
a range of conventional detectors, which have been
produced using the latest in manufacturing technology
and supplied with an array of advanced features, making
them ‘better by design’.
The ECO1005 thermal detector uses a state of the art
thermal element combined with an application specific
integrated circuit (ASIC)to provide quick and accurate
detection of fires. The detector incorporates both rate
of rise and static elements and is suitable for all areas
where the ambient conditions do not normally exhibit
rapid changes in temperature.
A laser-based hand held Remote Test Unit can be used
in conjunction with the range of ECO1000 detectors
for alarm test purposes. The unit transmits a coded
message, preventing spurious alarms being generated
by other laser-based devices. With a range of several
metres, the hand held test unit provides an effortless
way of remotely alarm testing the range of ECO1000
detectors and removes the need for any direct physical
access to the detector by the user.
-
Electrical Specifications
Operating Voltage Range 8 to 30VDC (Nominal 12/24VDC)
Maximum Standby Current @250C 70μA @ 24VDC
Maximum Permissible Alarm Current 80mA (current limited by control panel)
Environmental Specifications
Application Temperature Range (see note 1) -300C to 700C
Humidity 5% to 95% Relative Humidity (non-condensing)
Mechanical Information
Height 40.5mm (plus 9.5mm for standard base)
Diameter 102mm
Weight 70g (plus 45g for standard base)
Wire Gauge for Terminals 0.4mm2 to 2.0mm2
Colour Approximates to RAL9016
Material ABS