The ECO1004T thermal detector belongs to System Sensor’s ECO1000 range of detectors.ECO1000 is a range of conventional detectors, which have been produced using the latest in manufacturing technology and supplied with an array of advanced features, making them ‘better by design’.
The ECO1004T thermal detector uses a state of the art thermal element combined with an application specific integrated circuit (ASIC) to provide quick and accurate detection of fires. The detector incorporates a static element and is suitable where ambient conditions normally exhibit rapid changes in temperature e.g. kitchens.
A laser-based hand held Remote Test Unit can be used in conjunction with the range of ECO1000 detectors for alarm test purposes. The unit transmits a coded message,preventing spurious alarms being generated by other laser-based devices.With a range of several metres,the hand held test unit provides an effortless way of remotely alarm testing the range of ECO1000 detectors and removes the need for any direct physical access to the detector by the user.
• Low profile design
• Low current draw
• 780C operating temperature
• Operates at 12 and 24VDC
• Easy Maintenance
• Range of detector bases available
• Remote LED Option
• Certified to EN54 – 5:2000 (Amendment 1) Class BS
• Remote alarm test feature
• Extended warranty
Operating Voltage Range 8 to 30VDC (Nominal 12/24VDC)
Maximum Standby Current @250C 75μA @ 24VDC
Maximum Permissible Alarm Current 80mA (current limited by control panel)
Application Temperature Range (see note) -300C to 700C
Humidity 5% to 95% Relative Humidity (non-condensing)
Height 40.5mm (plus 9.5mm for standard base,21mm for deep base)
Weight 70g (plus 45g for standard base)
Wire Gauge for Terminals 0.4mm2 to 2.0mm2
Colour Approximates to RAL9016