A PHP Error was encountered

Severity: Notice

Message: Only variable references should be returned by reference

Filename: core/Common.php

Line Number: 257

A PHP Error was encountered

Severity: Warning

Message: Cannot modify header information - headers already sent by (output started at /home/speipl/public_html/system/core/Exceptions.php:185)

Filename: libraries/Session.php

Line Number: 688

System Product Enterprises (India) Pvt. Ltd.
Call us at: +91 22 43488488
Products Category

    A PHP Error was encountered

    Severity: Warning

    Message: mysql_fetch_array() expects parameter 1 to be resource, boolean given

    Filename: views/left.php

    Line Number: 36

Request Catalog
Fillup short form for request catalog


Home --> Fire Alarm Systems
FAAST_DataSheet
  • General
  • Feature
  • Specification
The FAAST 8100 aspirating smoke detector combines dual source (blue LED and infra-red laser) optical smoke detection with advanced algorithms to detect a wide range of fires while maintaining enhanced immunity to nuisance particulates. This enables FAAST to accurately detect incipient fire conditions as early as 30 to 60 minutes before a fire actually starts for Early Warning Fire Detection and Very Early Warning Fire Detection. For initial system creation, the PipeIQ* software guides users through pipe layout. The software also provides intuitive control over system configuration and ongoing system monitoring. An installed device can be monitored through its integral display, from a computer connected to the device, or remotely through a computer browser or mobile device when the detector is connected to the Internet via its Ethernet port. When Internet-connected, FAAST can also e-mail status updates to appropriate personnel. The detector can communicate alarm levels, urgent and minor faults, and isolate inputs via eight form C relays.
• Detection as precise as 0.00046 %/ft obscuration • Five alarm levels and two sensitivity modes provide application flexibility • Dual flow detection including both ultrasonic and electronic sensing for pipe and chamber air flow measurement • A single device protects up to 8,000 square feet • Advanced detection algorithms reject common nuisance conditions • Patented particle separator and field-replaceable filter remove contaminants from the system • PipeIQ™ software provides intuitive system layout, configuration, and monitoring all in one package • Onboard Ethernet interface enables remote monitoring and e-mail status updates • Fault indictors exhibit a broad spectrum of events • Unique air flow pendulum graph verifies pipe network functionality • Particulate graph displays subtle environmental changes for early problem indications
Electrical Specifications External Supply Voltage 18-30 VDC Remote Reset Time External monitor must be pulled low for a minimum of 100 ms Power Reset 1 sec. Avg. Operating Current 500 mA @ 24 VDC Alarm 650 mA – All relays active, all alarm levels displayed. Voltage @ 24 VDC Relay Contact Ratings 3.0 A @ 30 VDC, 0.5 A @ 125 VAC Environmental Ratings Operating Temperature 32°F (0°C) to 100°F (38°C) Sampled Air Temperature -4°F (-20°C) to 140°F (60°C) Humidity Range 10 to 95% (non-condensing) IP Rating IP30 Coverage Area 8,000 sq. ft. (743 sq. m) Air Movement 0-4,000 ft./min. (0-1,219 m/min.) Physical Specifications Height 13.25 inches (33.7 cm) Width 13.0 inches (33 cm) Depth 5.0 inches (12.7 cm) Cable Access 4 1-inch (2.54 cm) cable entry holes on top and bottom of unit Wire Gauge 12 AWG (2.05 mm) max. to 24 AWG (0.5 mm) min. Maximum Single Pipe Length 262 ft. (80 m) Maximum Branched (2) Pipe Length 165 ft. (50 m) each branch Maximum Air Inlet Holes 40 holes Network Outside Pipe Diameter 1.050 inches, IPS (25 mm) Internal Pipe Diameter 0.591 to 0.827 inches (15-21 mm) Sensitivity Range 0.00046 %/ft. obs – 4.0 %/ft. obs Relays 8 form C, 3 AMP, programmable latching or non-latching Event Log 18,000 events stored Communication Network Ethernet monitoring, 6 E-mail address alerts Shipping Weight 8.5 lbs. (3.8 kg), includes packing material
//