RE-386LP conventional gas (LPG)
detector are suitable for use with conventional fire
detection control panel as well as addressable fire
detection control panel that can accept onventional
type detectors via Zone Module.
Advanced electronics in conjunction with a
semiconductor gas sensor provides early detection
of Propane gas (LPG).
- Advanced algorithms provide advanced detection, discrimination.
- Stable gas sensing chamber. No adjustment or replacement required
- High immunity against unwanted alarms
- Surface-mount device (SMD) circuit board design
- 4-wire system operation
- Detector auto-reset once gas levels fall below alarm threshold levels
- Internal reed switch for hush and test functions
- DC 24 V operation
- N/O alarm relay output
- 70 dB internal sounder
- Easy installation. No programming required
- Connects to zone monitor for use with addressable control and indicating equipment
- Sleek low-profile housing design
- Low maintenance
Operating Voltage(21 ~ 27) VDC
Start-up current<120Ma
Start-up time<10min
Quiescent Current45 mA
Alarm Current (max)60mA
Sampling Time3s – 5s
Reset Voltage<1 V
Reset Time< 5s
Alarm response threshold<0.25 LELC3H8
Alarm relaySPST. N/O1.0 A @ DC 30 V / 0.5 A@AC 125 V
Auto reset time< 3s
Sounder output>70 db @ 3m
Operating temperature-10° C ~50° C
Operating humidity0 % ~ 95 % RH, non-condensing
Storage temperature-25° C ~80° C
Operating humidity0 % ~ 98 % RH, non-condensing
Quiescent condition indicatorSingle continuous emitting green LED
Alarm condition indicatorFlashing red LED
Dimensions
(excluding contacts)100mm X 38 mm
Ingress protection ratingIP-32