RE-386CO Conventional gas (CO) detector is one
of the most advanced design used to detect toxic
carbon monoxide gas engineered with electrochemical
sensor.
RE-386CO conventional gas (CO) detector are
suitable for use with conventional fire detection
control panel as well as addressable fire detection
control panel that can accept conventional type
detectors via Zone Module.
Advanced electronics in conjunction with a
semiconductor gas sensor provides early detection
of carbon monoxide (CO).
- Advanced algorithms provide advanced detection, discrimination.
- Stable gas sensing chamber. No adjustment or replacement required
- High immunity against unwanted alarms
- Surface-mount device (SMD) circuit board design
- 4-wire system operation
- Detector auto-reset once gas levels fall below alarm threshold levels
- Internal reed switch for hush and test functions
- DC 24 V operation
- N/O alarm relay output
- 70 dB internal sounder
- Easy installation. No programming required
- Connects to Zone Module for use with addressable control and indicating equipment
- Sleek low-profile housing design
- Low maintenance
Operating Voltage(21 ~ 27) VDC
Start-up current<120Ma
Start-up time<10min
Quiescent Current20 mA
Alarm Current (max)20mA
Sampling Time3s – 5s
Reset Voltage<1 V
Reset Time< 5s
Alarm response threshold 70 !L/L for 60 min ~ 240 min
150 !L/L for 10 min ~ 50 min
400 !L/L for 4 min ~ 15 min
50 !L/L for 60 min ~ 90 min
100 !L/L for 10 min ~ 40 min
300 !L/L for < 3 min
Alarm relaySPST. N/O1.0 A @ DC 30 V / 0.5 A@AC 125 V
Auto reset time< 3s
Sounder output>70 db @ 3m
Operating temperature-10° C ~50° C
Operating humidity0 % ~ 95 % RH, non-condensing
Storage temperature-25° C ~80° C
Operating humidity0 % ~ 98 % RH, non-condensing
Quiescent condition indicatorSingle continuous emitting green LED
Alarm condition indicatorFlashing red LED
Dimensions
(excluding contacts)100mm X 38 mm
Ingress protection ratingIP-32