RE-386LP conventional propane gas (LPG)
detector are suitable for use with conventional fire
detection control panel as well as addressable fire
detection control panel that can accept conventional
type detectors via Zone Module.
Advanced electronics in conjunction with a
semiconductor gas sensor provides early detection
of Propane gas (LPG).
Advanced algorithms provide advanced detection, discrimination.
Stable gas sensing chamber. No adjustment or replacement required
High immunity against unwanted alarms
Surface-mount device (SMD) circuit board design
4-wire system operation
Detector auto-reset once gas levels fall below alarm threshold levels
Internal reed switch for hush and test functions
DC 24 V operation
N/O alarm relay output
70 dB internal sounder
Easy installation. No programming required
Connects to zone monitor for use with addressable control and indicating equipment
Sleek low-profile housing design
Low maintenance
Operating Voltage(21 ~ 27) VDC
Quiescent Current45 mA
Alarm Current (max)60 mA
Sampling Time3 s ~ 5 s
Reset Voltage<1 V
Reset Time<5 s
Alarm response threshold<0.25 LELC3H8
Start-up current<120mA
Start-up time<10min
Alarm response threshold<0.25 LELC3H8
Alarm relaySPST. N/O1.0 A @ DC 30 V / 0.5 A@AC 125 V
Auto reset time< 30s
Sounder output>70 dB @ 3m
Operating temperature-10° C ~50° C
Operating humidity0 % ~ 95 % RH, non-condensing
Quiescent condition indicatorSingle continuous emitting green LED
Alarm condition indicatorFlashing red LED
Dimensions100mm X 38 mm
(excluding contacts)
Ingress protection ratingIP-32