The ZX5Se is an intelligent analogue addressable fire alarm control panel. It has been designed and is constructed around proven and reliable microprocessor technology. This simple approach has produced a modular, scaleable fire alarm platform suitable for protecting all types of premises. The ZX5Se control panel supports a total of five industry leading protocols, allowing fire detection devices to be independently selected based on performance or aesthetic appeal. The ZX series control panels seamlessly integrates with Apollo (Xplorer, XP95 & Discovery), Hochiki ESP, Nittan, Morley-IAS and System Sensor detection device protocols. Designed for maximum flexibility, the ZX5Se control panel is supported by a complete suite of peripherals and software tools. Information on the location of fires, faults and system status can easily be displayed or printed in multiple locations. Integration to Voice Evacuation Systems, paging systems and third party control systems is supported through a range of peripheral interface units.
• Modular concept
• Simple, robust design to EN54
• Intuitive to use
• Easy to maintain
• Easy to expand
• Easy to network
• Easy to install
• Easy to configure
Operating Voltage 230V 50Hz AC
(+10%, -15% voltage tolerance)
Max. PSU Rating
220VA, 6 Amp total, comprising: Battery Charger: 1 Amp
Internal & External Loads
General System Load: 2.25A @ 24V nominal
Loop Load: 2.50A
Standby Batteries 24V sealed lead acid batteries
Minimum Capacity: 2x 12V 7Ah
Maximum Capacity: 2x 12V 24Ah
Dimensions (mm) 500 x 500 x 195
Weight 20 kg without batteries
Environmental Operating Limits
Temperature: 0°C to +40°C
Humidity: 85% non-condensing (maximum)
Construction Sheet steel painted, sealed to IP32
Cable Entry 24 x 20mm knock-outs in top of cabinet
24 x 20mm knock-outs in bottom of cabinet
Loop Capacity 1 to 5 Loops expandable
460mA per loop Maximum
Apollo, Nittan and Hochiki Protocols:
Max. 126 devices (detectors and modules) per loop
Morley-IAS and System Sensor Protocols:
Max. 99 sensor and 99 module addresses per loop
Zones Up to 20 zone with individual LED indicators. Expandable to 40 or 80 individual LED indicators. A maximum 200 can be programmed with up to 120 software zones
with no LED indication. Internal Sounder Intermittent buzzer (fault condition) Highpitched continuous buzzer (fire condition)
Sounder Outputs 2 programmable outputs. Open and short circuit monitoring. 1A maximum per output.
Auxiliary Relays 1 fault and 1 fire relay voltage free, changeover
outputs Contacts rated at 24V AC/DC, 1A, 0.6 PF maximum.
SOUND ALARMS, SILENCE/ RESOUND, MUTE BUZZER, ACCEPT, SYSTEM RESET
Alphanumeric multi-level keypad with 15 keys and 5 control keys: YES, NO, CHANGE, ENTER and SHIFT
LED type general panel status indicators
FIRE, FAULT, ACKNOWLEDGED, DISABLEMENT, TEST, SOUNDER FAULT, DELAYED MODE, RELAYS DISABLED, EARTH FAULT, SYSTEM /CPU FAULT, SOUNDERS DISABLED, ALARMS SILENCED, SUPPLY FAULT, POWER.
LED type zone Indicators (for 20 zones) FIRE, FAULT/TEST/DISABLED
4x40-character LCD alphanumeric display with back-light.
3 serial ports with connections for optional RS485 or RS232 plug-in communication cards.
Maximum 99 panels can be networked using a Master Network and connected Sub-Networks.