A PHP Error was encountered

Severity: Notice

Message: Only variable references should be returned by reference

Filename: core/Common.php

Line Number: 257

A PHP Error was encountered

Severity: Warning

Message: Cannot modify header information - headers already sent by (output started at /home/speipl/public_html/system/core/Exceptions.php:185)

Filename: libraries/Session.php

Line Number: 688

System Product Enterprises (India) Pvt. Ltd.
Call us at: +91 22 43488488
Products Category

    A PHP Error was encountered

    Severity: Warning

    Message: mysql_fetch_array() expects parameter 1 to be resource, boolean given

    Filename: views/left.php

    Line Number: 36

Request Catalog
Fillup short form for request catalog


Home --> Fire Alarm Systems
CRF-300-6
  • General
  • Feature
  • Specification
Fire-Lite’s CRF-300-6 six-relay control module provides an intelligent alarm system with six Form-C relays. The first module is addressed from 01 to 154 while the remaining modules are automatically assigned to the next five higher addresses. Provisions are included for disabling a maximum of three unused modules. A single isolated set of dry relay contacts is provided for each module address, which is capable of being wired for either a normally-open or normally- closed operation. The module allows the control panel to switch these contacts on command. No supervision is provided for the controlled circuit. Each CRF-300-6 module has panel-controlled green LED indicators. The panel can cause the LEDs to blink, latch on, or latch off.

• Six addressable Form-C relay contacts.

• Removable 12 AWG (3.25 mm²) to 18 AWG (0.9 mm²) plugin terminal blocks.

• Status indicators for each point.

• Unused addresses may be disabled.

• Rotary address switches.

• Mount one or two modules in a BB-X2F cabinet (optional).

• Mount up to six modules on a CHS-6 chassis in a BB-2F cabinet (optional).

• Mounting hardware included.

Standby current: 1.45 mA (SLC current draw with all addresses used; if some addresses are disabled, the standby current decreases). Alarm current: 32 mA (assumes all six relays have been switched once and all six LEDs solid ON). Temperature range: 32°F to 120°F (0°C to 49°C). Humidity: 10% to 85% noncondensing. Dimensions: 6.8"" (172.72 mm) high x 5.8"" (147.32 mm) wide x 1.0"" (25.40 mm) deep. Shipping weight: 1.1 lb. (0.499 kg) including packaging. Wire gauge: 12 AWG (3.25 mm²) to 18 AWG (0.9 mm²). Maximum SLC wiring resistance: 40 or 50 ohms, panel dependent. Maximum IDC wiring resistance: 40 ohms. Relay current: 30 mA/relay pulse (15.6 ms pulse duration), pulse under panel control. Relay contact ratings: 30 VDC; 70.7 VAC.
//