The Local and Remote Printers are compact I/O devices
for the intelligent multi protocol fire alarm control
panels. These printers, along with other remote I/O
devices provide a complete range of peripherals to
further enhance the functionality and expandability of
the Morley-IAS ZX series panels.
Combined with the LCD on the fire alarm control panel,
the printers provide enhanced alarm fault recording.
On a change of state, the printer documents all the
information on the LCD (the logical address and
description of the point, the status of the point) with a
date and time stamp.
Two versions of the printers available:
• 40 Character internal printer (ZXe & ZX5e only)
• 40 Character external wall mount printer (ZXa,ZXe,
ZX1e, ZX2e, ZX5e)
The 40 character internal printer can be installed directly
in a ZXe/ZX5e panel to provide hard copy print-out of
the events at the panel. The printer and the interface
card are mounted on the door of the ZXe/ZX5e in
the space provided below the zone indicators.
When a local printer is required with the ZX1,
ZX1e, ZXa or ZX2e control panel the external
printer option must be used.
• Compatible with ZX series multi protocol intelligent fire alarm control panels
• Internal (ZXe/ZX5e only) and external printer options
• External printer option:
• Local or remote connection options
• Built-in 230Vac or 110Vac power supply and battery charger
• Four LED status indications Up to 1.2 Km (3937 ft) from the fire panel (Peripheral bus connection - RS485)
• Up to 31 remote printers can be connected to a peripheral bus
mechanical
Dimensions (H x W x D):
Internal Printer: 90 x 90 x 110 mm
External Printer: 170 x 400 x 130 mm
Weight:
Internal Printer: 320 gr. (11 oz)
External Printer: 5.1 kg (11 lbs)
Operating temperature: 0°C to 49°C
Humidity: 10% to 93% non-condensing
electrical
Operating voltage :
Internal Printer: 8 Vac from the secondary winding of the transformer
External Printer: 110 Vac 60Hz or 230 Vac 50Hz
Current consumption:
External Printer: 100 mA Stand-by batteries
(external printer only): 6V, 1.2Ah
(24 hours stand-by,
30 min. printing)
Terminals: Maximum cable cross
sectional area 2.5mm2
(13 AWG)
Wiring:
Connected to Port A: Maximum 0.5 m (2 ft) from the control panel.
Connected to Port D: Maximum Peripheral Bus Length:1,200 m (3937 ft)
LED indicators (external printer) :
Data: Red, flashes when printer receives valid data Fault: Yellow, illuminates when printer enters fault mode AC Supply: Green, illuminates when printer has mains supply
DC Supply: Green, illuminates when printer has a mains supply or an adequate battery supply
User controls (external printer): PB1: Printer test or paper feed (selectable via J1)
J2/J3: In/In: Print all information
Out/In: Print all messages in Automode (no manually selected information such as event log data) Out/Out: Print all fire alarms in Auto mode (no manually selected information such as
event log data).
