A PHP Error was encountered

Severity: Notice

Message: Only variable references should be returned by reference

Filename: core/Common.php

Line Number: 257

A PHP Error was encountered

Severity: Warning

Message: Cannot modify header information - headers already sent by (output started at /home/speipl/public_html/system/core/Exceptions.php:185)

Filename: libraries/Session.php

Line Number: 688

System Product Enterprises (India) Pvt. Ltd.
Call us at: +91 22 43488488
Products Category

    A PHP Error was encountered

    Severity: Warning

    Message: mysql_fetch_array() expects parameter 1 to be resource, boolean given

    Filename: views/left.php

    Line Number: 36

Request Catalog
Fillup short form for request catalog

Home --> Morley-IAS
Zx Printer
  • General
  • Feature
  • Specification
The Local and Remote Printers are compact I/O devices for the intelligent multi protocol fire alarm control panels. These printers, along with other remote I/O devices provide a complete range of peripherals to further enhance the functionality and expandability of the Morley-IAS ZX series panels. Combined with the LCD on the fire alarm control panel, the printers provide enhanced alarm fault recording. On a change of state, the printer documents all the information on the LCD (the logical address and description of the point, the status of the point) with a date and time stamp. Two versions of the printers available: • 40 Character internal printer (ZXe & ZX5e only) • 40 Character external wall mount printer (ZXa,ZXe, ZX1e, ZX2e, ZX5e) The 40 character internal printer can be installed directly in a ZXe/ZX5e panel to provide hard copy print-out of the events at the panel. The printer and the interface card are mounted on the door of the ZXe/ZX5e in the space provided below the zone indicators. When a local printer is required with the ZX1, ZX1e, ZXa or ZX2e control panel the external printer option must be used.
• Compatible with ZX series multi protocol intelligent fire alarm control panels • Internal (ZXe/ZX5e only) and external printer options • External printer option: • Local or remote connection options • Built-in 230Vac or 110Vac power supply and battery charger • Four LED status indications Up to 1.2 Km (3937 ft) from the fire panel (Peripheral bus connection - RS485) • Up to 31 remote printers can be connected to a peripheral bus
mechanical Dimensions (H x W x D): Internal Printer: 90 x 90 x 110 mm External Printer: 170 x 400 x 130 mm Weight: Internal Printer: 320 gr. (11 oz) External Printer: 5.1 kg (11 lbs) Operating temperature: 0°C to 49°C Humidity: 10% to 93% non-condensing electrical Operating voltage : Internal Printer: 8 Vac from the secondary winding of the transformer External Printer: 110 Vac 60Hz or 230 Vac 50Hz Current consumption: External Printer: 100 mA Stand-by batteries (external printer only): 6V, 1.2Ah (24 hours stand-by, 30 min. printing) Terminals: Maximum cable cross sectional area 2.5mm2 (13 AWG) Wiring: Connected to Port A: Maximum 0.5 m (2 ft) from the control panel. Connected to Port D: Maximum Peripheral Bus Length:1,200 m (3937 ft) LED indicators (external printer) : Data: Red, flashes when printer receives valid data Fault: Yellow, illuminates when printer enters fault mode AC Supply: Green, illuminates when printer has mains supply DC Supply: Green, illuminates when printer has a mains supply or an adequate battery supply User controls (external printer): PB1: Printer test or paper feed (selectable via J1) J2/J3: In/In: Print all information Out/In: Print all messages in Automode (no manually selected information such as event log data) Out/Out: Print all fire alarms in Auto mode (no manually selected information such as event log data).