System Sensor® SpectrAlert® Advance selectable-output chimes and chime/strobes are private-mode notification appliances used to alert trained personnel to investigate possible emergency situations and to take appropriate action. Security guard and nurse workstations are ideal locations for chime products. SpectrAlert Advance chimes and chime/strobes are rich with features guaranteed to cut installation times and maximize profits. The SpectrAlert Advance series of notification appliances is designed to simplify your installations, with features such as: plug-in designs, instant feedback messages to ensure correct installation of individual devices, and seven field-selectable candela settings for chime/strobes. More specifically, when installing Advance products, first attach a universal mounting plate to a four-inch (10.16 cm) square, four-inch octagonal, single-gang, or double-gang junction box. Then, connect the notification appliance circuit wiring to the SEMS terminals on the mounting plate. Finally, attach the chime or chime/strobe to the mounting plate by inserting the product’s tabs in the mounting plate’s grooves. The device will rotate into position, locking the product’s pins into the mounting plate’s terminals. The device will temporarily hold in place with a catch until it is secured with a captive mounting screw. SpectrAlert Advance products allow you to choose: • 12 or 24 volts. • At 24 volts, 15, 15/75, 30, 75, 95, 110, or 115 candela by way of rear-mounted slide-switch and front-view window. • Chime tones and volume by way of rotary switch.

• Plug-in design.

• Shorting spring on mounting plate for pre-installation continuity check.

• Captive mounting screw.

• Torx screw for tamper resistance.

• Field-selectable candela settings: 15, 15/75, 30, 75, 95,110, 115.

• Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela.

• Minimal intrusion into the backbox.

• Rotary switch for tone selection.

• Two volume settings.

• Electrically compatible with existing SpectrAlert products.

• Standard operating temperature: 32°F to 120°F (0°C to 49°C).

• Humidity range: 10% to 93% non-condensing (indoor products).

• Strobe flash rate: 1 flash per second.

• Nominal voltage: regulated 12 VDC/FWR or regulated 24 VDC/FWR. NOTE: Full Wave Rectified (FWR) voltage is a non-regulated, time-varying power source that is used on some power supply and panel outputs.

• Operating voltage range: 8 V to 17.5 V (12 V nominal); or 16 V to 33 V (24 V nominal). NOTE: CHS products will operate at 12 V nominal only for 15 cd and 15/75 cd. • Input terminal wire gauge: 12 to 18 AWG (3.31 to 0.821 mm²).

• Chime/strobe dimensions (including lens): 5.6"" H x 4.7"" W x 2.5"" D (14.2 cm H x 11.9 cm W x 6.4 cm D).

• Chime dimensions: 5.6"" H x 4.7"" W x 1.3"" D (14.2 cm H x 11.9 cm W x 3.3 cm D).