A PHP Error was encountered

Severity: Notice

Message: Only variable references should be returned by reference

Filename: core/Common.php

Line Number: 257

A PHP Error was encountered

Severity: Warning

Message: Cannot modify header information - headers already sent by (output started at /home/speipl/public_html/system/core/Exceptions.php:185)

Filename: libraries/Session.php

Line Number: 688

System Product Enterprises (India) Pvt. Ltd.
Call us at: +91 22 43488488
Products Category

    A PHP Error was encountered

    Severity: Warning

    Message: mysql_fetch_array() expects parameter 1 to be resource, boolean given

    Filename: views/left.php

    Line Number: 36

Request Catalog
Fillup short form for request catalog

Home --> Morley-IAS
  • General
  • Feature
  • Specification
The Morley-IAS MI-CZME module is used with ZX series intelligent multi protocol fire alarm control panels to monitor a zone of 2-wire conventional smoke detectors. Each MI-CZME uses one of 99 available module addresses on a loop. It responds to regular polls from the control panel and reports its type and the status (open/normal/ fire/short) of its zone circuit. A flashing LED indicates that the module is in communication with the control panel. The LED latches steady on alarm (subject to current limitations on the loop). The module may be mounted to the SMB-500 surfacemount box or 4” box. Mounting hardware and installation instructions are provided with each module.
• Supports compatible two-wire smoke detectors • Supervises wiring and connection of external power source • High noise (EMI/RFI) immunity • SEMS screws with clamping plates for ease of wiring • Two rotary switches for direct dial entry of DECADE address (01-99) • LED flashes during normal operation (optional) • LED latches steady to indicate alarm on command from control panel
mechanical Weight: 227 gr. (8 oz) Operating temperature: -10°C to 60°C Relative humidity: 10% to 93% non-condensing electrical Operating voltage: 15 to 32 Vdc Loop 22.2 to 25.5 Vdc Zone supply Consumption current: 200μA maximum standby 7 mA supervisory current 20 mA maximum alarm current Terminals: SEMS screws with clamping plates for up the 2.5 mm2 (13 AWG) wire