A PHP Error was encountered

Severity: Notice

Message: Only variable references should be returned by reference

Filename: core/Common.php

Line Number: 257

A PHP Error was encountered

Severity: Warning

Message: Cannot modify header information - headers already sent by (output started at /home/speipl/public_html/system/core/Exceptions.php:185)

Filename: libraries/Session.php

Line Number: 688

System Product Enterprises (India) Pvt. Ltd.
Call us at: +91 22 43488488
Products Category

    A PHP Error was encountered

    Severity: Warning

    Message: mysql_fetch_array() expects parameter 1 to be resource, boolean given

    Filename: views/left.php

    Line Number: 36

Request Catalog
Fillup short form for request catalog


Home --> Morley-IAS
DS_MI-D240CMO,-DIN_E
  • General
  • Feature
  • Specification
The Morley-IAS MI-D240CMO and MI-D240CMO-DIN control output modules are used with the Morley-IAS intelligent fire alarm control panels to provide management of 240Vac loads. The modules are loop powered devices controlling an unsupervised double pole relay output with one normally open and one normally closed contact. The output relay is a bistable device, latching in either the on or the off state on command from the fire alarm control panel. Each module uses one of the ninety-nine possible module addresses available on a loop. It responds to regular polling from the control panel, indicated by a pulsing LED every successful communication. Each module is supplied with a built-in isolator for protection. However, to increase application flexibility individual isolators may be switched out as required.
240Vac mains switching DIN rail mounting option Surface mounting option Bi-colour LED status indication Built-in Short Circuit Isolators Visible Address selector switches Plug in connectors Approved to GEA GEI 1-082 and CEA GEI 1-084
mechanical Dimensions (H x W x D) MI-D240CMO 134 x 139 x 40 mm MI-D240CMO-DIN 76 x 125 x 48 mm Weight 200 g Operating Temperature -20 ºC to +60 ºC Relative Humidity 0 to 95% maximum non-condensing electrical Operating voltage 15 to 30 Vdc Standby current No comms 275μA at 24 Vdc maximum 1 comms every 5 seconds with LED blink 445μA at 24 Vdc maximum Terminal Wire 1.5 mm2 maximum Output Rating 5A at 30 Vdc, resistive load. 5A at 240 Vac, resistive load.
//