A PHP Error was encountered

Severity: Notice

Message: Only variable references should be returned by reference

Filename: core/Common.php

Line Number: 257

A PHP Error was encountered

Severity: Warning

Message: Cannot modify header information - headers already sent by (output started at /home/speipl/public_html/system/core/Exceptions.php:185)

Filename: libraries/Session.php

Line Number: 688

System Product Enterprises (India) Pvt. Ltd.
Call us at: +91 22 43488488
Products Category

    A PHP Error was encountered

    Severity: Warning

    Message: mysql_fetch_array() expects parameter 1 to be resource, boolean given

    Filename: views/left.php

    Line Number: 36

Request Catalog
Fillup short form for request catalog


Home --> Fire Alarm Systems
Apollo Loop card
  • General
  • Feature
  • Specification
The plug-in loop driver card provides power for and handles communications to the addressable devices. The loop driver card continuously checks the analogue values of all sensors and displays this value on the control panel as a percentage of the alarm threshold value. Both the alarm and pre-alarm threshold levels can be adjusted from the control panel if required. Up to 126 devices can be connected to a single loop driver card. Each Apollo device has either an XPERT key (in the detector base) or a Dual-In-Line (DIL) Switch (on the module) to allow a unique address, in the range 001 to 126, to be selected. The loop driver card can support class-A and class- B wiring configurations. Short-circuit isolation and double address detection are built into the plug-in card. The AUTO-LEARN facility provided in the ZX series control panels saves considerable time and effort when installing a new loop or when changing sensor configuration. It allows the system to learn for itself what devices have been installed on the loop. The fire alarm panel performs a calibration and contamination check once every 24 hours. If the detector zero point falls outside of specific limits or approaches the pre-alarm point, the panel will indicate a trouble. A calibration is automatically performed each time an Auto-Learn is performed. A manual “Calibrate” option is also available on the configuration menu
• Compatible with ZX series intelligent multi protocol fire alarm control panels • Provides one class-A or class-B loop • Supports Discovery and XP95 detectors and modules • Plug-in connection • Double address detection
mechanical Dimensions (HxWxD): 90 x 54 x 25 mm Weight: 32 gr. (1 oz) Operating temperature: 0°C to 49°C Humidity: 10% to 93% non-condensing electrical Loop voltage: 795-066 Card: >25 V + signaling pulses 794-066 Card: >25 V + signaling pulses Power consumption: 795-066 Card: 40mA (excluding loop devices) 794-066 Card: 40mA (excluding loop devices) Maximum continous loop drive current: 795-066 Card: 250mA (continuous) per driver 794-066 Card: 250mA (continuous) per driver Maximum circuit ratings: Resistance: 36 Ohm max. Capacitance: 0.6ìF max. Diagnostics: One LED to indicate communication with a device. Loop terminations: Screw terminals on the motherboard for a maximum cable cross sectional area of 2.5 mm2 (13 AWG) removable block. Wiring: Class A or class B with shielded, twisted wire.
//